TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 391 of 1207

TM 9-2320-361-20

3-38. EXHAUST SYSTEM REPLACEMENT (M50A2 AND M50A3) (Contd)

10. Remove locknut (10), screw (2), coupling (3), and gasket (4) from exhaust pipe (1) and Y-pipe (5).

Discard locknut (10) and gasket (4),

11. Remove locknut (9), screw (6), clamp (7), and Y-pipe (5) from bracket (8). Discard locknut (9).

12. Remove locknut (17), screw (14), coupling (15), exhaust pipe (1), and gasket (16) from exhaust

pipe (18). Discard locknut (17) and gasket (16).

13. Remove four locknuts (19), screws (11), exhaust pipe (18), and gasket (13) from manifold (12).

Discard locknuts (19) and gasket (13).

b. Installation

1.

2.

3.

4.

5.

3-88

Install new gasket (13) and exhaust pipe (18) on exhaust manifold (12) with four screws (11) and

new locknuts (19).

Install new gasket (16) and exhaust pipe (1) on exhaust pipe (18) with coupling (15), screw (14), and

new locknut (17).

Install Y-pipe (5) on bracket (8) with clamp (7), screw (6), and new locknut (9). Do not tighten

locknut (9).

Install Y-pipe (5) on exhaust pipe (1) with new gasket (4), coupling (3), screw (2), and new

locknut (10).

Tighten locknut (9).