TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 387 of 1207

TM 9-2320-361-20

3-37. EXHAUST SYSTEM REPLACEMENT (Contd)

b. Installation

1.

3.

2.

4.

5.

6.

7.

8.

9.

10.

11.

3-84

Install exhaust pipe (29) on fender (32).

Install exhaust pipe (29) on bracket (16) with U-bolt (35), clamp (17), two new lockwashers (6), and

nuts (5).

Install exhaust pipe (29) on bracket (25) with clamp (26), washer (27), screw (28), washer (19), and

new locknut (20).

Install cover plates (18) on fender (32) with two washers (33), screws (34), washers (31), and two

new locknuts (30).

Install exhaust shield (36) on exhaust pipe (29) with two clamps (3), four screws (37), and new

locknuts (4).

Install new gasket (40) and stack pipe (1) on exhaust pipe (29) with coupling (39), screw (38), and

new locknut (2). Do not tighten locknut (2).

Position outlet of stack pipe (1) outward and approximately 45° to the rear of vehicle. Tighten

coupling (39).

Install new gasket (24) and flex tube (15) on exhaust pipe (29) with coupling (23), screw (21), and

new locknut (22). Do not tighten locknut (22).

Install new gasket (10) and elbow (9) on turbocharger (12) with clamp (11). Do not tighten

clamp (11).

Install new gasket (8) and flex tube (15) on elbow (9) with coupling (14), screw (7), and new

locknut (13). Tighten coupling (14).

Tighten clamp (11) and coupling (23).