TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 381 of 1207

TM 9-2320-361-20

3-35. HAND THROTTLE CONTROL CABLE MAINTENANCE

This task covers:

a. Removal

c. Adjustment

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

All

MATERIAL/PARTS

Lockwasher

PERSONNEL REQUIRED

Two

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

Hood raised and secured (TM 9-2320-361-10).

1. Straighten end of control wire (4) and remove screw (1), connector (2), and control wire (4) from

accelerator rod flange (3).

NOTE

Assistant will help with step 2.

2, Remove nut (7) from screw (6) and slide nut (7) off end of control cable (8).

3. Pull control cable (8) up through hole in cab floor (5) and remove screw (6) from end of control

cable (8).

4. Remove nut (12) and lockwasher (11) fron control cable (8). Discard lockwasher (11).

5. Pull hand throttle control (10) out from instrument panel (9).

3-78