TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 373 of 1207
TM 9-2320-361-20
Section VIl. ACCELERATOR SYSTEM MAINTENANCE
3-32. ACCELERATOR SYSTEM MAINTENANCE INDEX
PARA.
TITLE
PAGE
NO.
NO.
3-33.
Accelerator Pedal, Brackets, and Rod Maintenance
3-70
3-34.
Engine Stop Control Cable Maintenance
3-76
3-35.
Hand Throttle Control Cable Maintenance
3-78
3-33. ACCELERATOR PEDAL, BRACKETS, AND ROD MAINTENANCE
This task covers:
a. Removal
c. Adjustment
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Five locknuts
EQUIPMENT CONDITION
Seven cotter pins
Parking brake set (TM 9-2320-361-10).
PERSONNEL REQUIRED
Hood raised and secured (TM 9-2320-361-10).
Two
1. Remove throttle return spring (10) from swivel (9) and throttle return clip (1).
2. Remove screw (3), washers (2), and throttle return clip (1) from steering gear housing (12).
3. Remove cotter pin (4) and pin (11) from swivel (9) and disconnect swivel (9) from pump lever (13).
Discard cotter pin (4).
4. Loosen screw (5) and remove connector (6), screw (5), and control wire (7) from accelerator rod (8).
5. Remove locknut (19), ball joint (21), and accelerator rod (22) from lever (20). Discard locknut (19).
6. Remove cotter pin (18), washer (17), and connecting link (16) from lever (20). Discard cotter pin (18).
7. Remove two cotter pins (14), pin (15), and lever (20) from bracket (24). Discard cotter pins (14).
NOTE
Assistant will help with step 8.
8. Remove two locknut (25), screws (26), and bracket (24) from cab floor (23). Discard locknuts (25).
3-70
Back to Top
