TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 406 of 1207

TM 9-2320-361-20

3-45. WATER MANIFOLD AND HOSE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Six lockwashers

EQUIPMENT CONDITION

Three gaskets

●

Parking brake set (TM 9-2320-361-10).

• Hood raised and secured (TM 9-2320-361-10).

●

Manifold heater removed (uncovered)

(para. 3-31).

NOTE

There

are two water manifolds and hoses. Both are removed the same way.

1. Loosen two clamps (7) on hose (8).

2. Remove six screws (1) and lockwashers (2) from water manifold (3). Discard lockwashers (2).

3. Remove water manifold (3), three gaskets (4), hose (8), and two clamps (7) from cylinder head (6)

and intake manifold (5). Discard gaskets (4).

1. Install hose (8) and two clamps (7) on water manifold (3). Do not tighten clamps (7).

2. Install three new gaskets (4) and water manifold (3) on cylinder head (6) and intake manifold (5)

with six new lockwashers (2) and screws (l).

3. Tighten two clamps (7) on hose (8).

FOLLOW-ON TASK: Install manifold heater (uncovered) (para. 3-31).

3-103