TM 9-2320-361-20
7-8. FRONT AND REAR AXLE BREATHER MAINTENANCE
This task covers:
a. Removal
c. Installation
b. Cleaning
INITIAL SETUP:
APPLICABLE MODELS
All
MATERIALS/PARTS
Drycleaning solvent (Appendix C, Item 26)
Rags (Appendix C, Item 21)
REFERENCES (TM)
TM 9-2320-361-10
TM 9-2320-361-20P
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
GENERAL SAFETY INSTRUCTIONS
Keep fire extinguisher nearby when using
drycleaning solvent.
a. Removal
NOTE
This procedure is for all axles.
Remove breather (1) from axle housing (2).
b. Cleaning
WARNING
Drycleaning solvent is flammable and will not be used near open
flame. Use only in well-ventilated places. Failure to do so may
result in injury to personnel.
Clean breather (1) in drycleaning solvent and dry with clean rag.
c. Installation
Install breather (1) in axle housing (2).
7-21