TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 585 of 1207

TM 9-2320-361-20

8-4. PARKING BRAKE CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

All

Parking brake lever removed (para. 8-5).

MATERIALS/PARTS

Remove spare tire if mounted horizontal to rear of

toolbox (M275A2 and M342A2)

Lockwasher

(TM 9-2320-361-10).

REFERENCES (TM]

Wheels chocked (TM 9-2320-361-10).

TM 9-2320-361-10

TM 9-2320-361-20P

a. Removal

1.

2.

3.

4.

5.

6.

Remove spring (3) from lever (5) and bracket (4).

NOTE

Mark nut position on threaded end of parking brake cable for

installation.

Remove nut (2) from threaded end (1) of parking brake cable (6) and slide parking brake cable (6)

from eye of lever (5).

Remove screw (10), lockwasher (9), and clamp (8) from parking brake cable (6) and transfer case (7).

Discard lockwasher (9).

Remove two nuts (14), screws (11), upper clamp half (12), lower clamp half (15), and parking brake

cable (6) from frame (13).

Remove two nuts (19), screws (18), clamp (17), spacer (16), and parking brake cable (6) from

bracket (20).

Remove four nuts (24), screws (21), two clamps (22), and parking brake cable (6) from wear

plate (23).

8-12