TM 9-2320-361-20
8-34. AIRBRAKE HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
M275A2
MATERIALS/PARTS
Antiseize tape (Appendix C, Item 27)
REFERENCES (TM)
TM 9-2320-361-10
TM 9-2320-361-20P
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
Air reservoirs drained (TM 9-2320-361-10).
GENERAL SAFETY INSTRUCTIONS
Do not disconnect air lines before draining air
reservoirs.
NOTE
The right emergency and left service airbrake hoses are replaced
the same. This procedure covers the left side of service brake.
a.
Removal
WARNING
Do not disconnect air couplings before draining air reservoirs.
Small parts under pressure may shoot out with high velocity,
causing injury to personnel.
1. Remove hose (3) from adapter (5) and ring (4).
2. Remove coupling (1) from adapter (2).
3. Remove adapter (2) from hose (3).
NOTE
Wrap all male pipe threads with antiseize tape before installation.
1. Install adapter (2) on hose (3).
2. Install coupling (1) on adapter (2).
3. Install hose (3) on ring (4) and adapter (5).
8-82