TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 789 of 1207
TM 9-2320-361-20
12-5. CARGO BODY UPPER AND LOWER REAR SPLASH GUARD REPLACEMENT
(M35A2C)
This task covers:
a. Lower Splash Guard Removal
c. Upper Splash Guard Installation
b. Upper Splash Guard Removal
d. Lower Splash Guard Installation
INITIAL SETUP:
APPLICABLE MODELS
M35A2C
REFERENCES (TM)
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Thirteen locknuts
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
a. Lower Splash Guard Removal
Remove five locknuts (8), screws (11), retaining strip (9), and lower splash guard (10) from upper splash
guard (7). Discard locknuts (8).
b. Upper Splash Guard Removal
1. Remove two locknuts (6) and screws (12) from upper splash guard braces (16) and upper splash
guard (7). Discard locknuts (6).
2. Remove two locknuts (3), screws (4), and braces (16) from frame (5). Discard locknuts (3).
3. Remove two locknuts (18) and screws (2) from top of upper splash guard (7) and frame (1). Remove
upper splash guard (7). Discard locknuts (18).
4. Remove two locknuts (13), screws (17), bumper (15), and plate (14) from upper splash guard (7).
Discard locknuts (13).
c. Upper Splash Guard Installation
1. Install plate (14) and bumper (15) on upper splash guard (7) with two screws (17) and new
locknuts (13).
2. Install upper splash guard (7) on frame (1) with two screws (2) and new locknuts (18).
3. Install two braces (16) on frame (5) with two screws (4) and new locknuts (3).
4. Install upper splash guard braces (16) on upper splash guard (7) with two screws (12) and new
locknuts (6).
d. Lower Splash Guard Installation
Place lower splash guard (10) in retaining strip (9) and install on upper splash guard (7) with five
screws (11) and new locknuts (8).
12-6
Back to Top
