TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 797 of 1207
TM 9-2320-361-20
12-9. CARGO BODY FRONT RACK MAINTENANCE (M36A2)
This task covers:
a. Disassembly
c. Assembly
b. Inspection
INITIAL SETUP:
APPLICABLE MODELS
EQUIPMENT CONDITION
M36A2
Parking brake set (TM 9-2320-361-10).
REFERENCES (TM)
TM 9-2320-361-10
TM 9-2320-361-20P
Cargo body front rack removed
(TM 9-2320-361-10).
a. Disassembly
1. Remove two nuts (1), screws (8), and handles (9) from cargo front rack end channels (7).
2. Remove twelve nuts (3), screws (5), and two posts (2) from cargo body front rack slats (6).
3. Remove two wood fillers (4) from two posts (2).
4. Remove ten nuts (1), screws (8), and two end channels (7) from cargo body front rack slats (6).
1. Inspect two posts (2) and end channels (7) for cracks, bends, and excessive rust. Replace posts (2) or
end channels (7) if cracked, bent, or excessively rusted.
2. Inspect cargo body front rack wood slats (6) for splinters, warps, or excessive rotting. Replace front
rack wood slats (6) if splintered, warped, or excessively rotted.
1.
2.
3.
4.
5.
NOTE
Do not tighten nuts until all screws are installed.
Install two end channels (7) on front rack slats (6) with ten screws (8) and nuts (1).
Insert two wood fillers (4) in posts (2).
Install two posts (2) on front rack slats (6) with twelve screws (5) and nuts (3). Do not tighten
nuts (3).
Install two handles (9) on cargo body front rack end channels (7) with two screws (8) and nuts (1).
Tighten ten nuts (1) and twelve nuts (3).
FOLLOW-ON TASK: Install cargo body front rack (TM 9-2320-361-10).
12-14
Back to Top
