TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 814 of 1207

TM 9-2320-361-20

12-20. DISCHARGE VALVE REPLACEMENT (M49A2C) (Contd)

3. Remove two locknuts (13), screws (15), coupling (14), and gasket (12) from discharge valve (16) and

drain tube (11). Discard locknuts (13) and gasket (12).

4. Remove six locknuts (1), discharge valve (16), and gasket (2) from bottom of tank (3). Remove gasket

remains from mating surfaces. Discard gasket (2) and locknuts (1).

b. Installation

1. Install new gasket (2) and discharge valve (16) on bottom of tank (3) with six new locknuts (1).

2. Install new gasket (12) and drain tube (11) on discharge valve (16) with coupling (14), two

screws (15), and new locknuts (13).

3. Install lever (5) on discharge valve (16) with screw (4) and new locknut (6).

4. Install cable (8) on lever (5) with U-bolt (7), two plates (9), and two new locknuts (10). Remove slack

in cable (8) and tighten nuts (10).

FOLLOW-ON TASK: Fill fuel tanks (TM 9-2320-361-10) and check for leaks.

12-31