TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 807 of 1207

TM 9-2320-361-20

12-17. DUMP BODY REAR SPLASH GUARD REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

M342A2

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Twelve locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

1. Remove five locknuts (4), screws (8), splash guard (7), and retaining strip (6) from guard (5). Remove

retaining strip (6) from splash guard (7). Discard locknuts (4).

2. Remove five locknuts (3), screws (9), and guard (5) from mounting bracket (2). Discard locknuts (3).

3. Remove two locknuts (1), screws (10), and mounting bracket (2) from frame (11). Discard locknuts (1).

1. Install mounting bracket (2) on frame (11) with two screws (10) and new locknuts (1).

2. Install guard (5) on mounting bracket (2) with five screws (9) and new locknuts (3).

3. Install retaining strip (6) and splash guard (7) on guard (5) with five screws (8) and new lock-

nuts (4).

12-24