TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 840 of 1207
TM 9-2320-361-20
12-37. METER OUTLET TUBE REPLACEMENT (M49A2C)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
EQUIPMENT CONDITION
M49A2C
Parking brake set (TM 9-2320-361-10).
MATERIALS/PARTS
Fuel hose and nozzle removed (para. 12-24).
Two gaskets
Six locknuts
GENERAL SAFETY INSTRUCTIONS
Keep fire extinguisher nearby when working on fuel
REFERENCES (TM)
tank trucks.
TM 9-2320-361-10
TM 9-2320-361-20P
WARNIN G
Do not perform this procedure while smoking or within 50 feet of sparks or open flame. Fuel is
flammable and can explode easily, causing injury or death to personnel and damage to equipment.
NOTE
Have drainage container ready to catch fuel.
1. Remove two locknuts (6), screws (8), and gasket (7) from outlet tube (13) and meter (5). Discard
locknuts (6) and gasket (7).
2. Remove two nuts (15), screws (2), coupling (3), and gasket (14), from meter outlet tube (13) and fuel
hose tube (1). Discard gasket (14).
3. Remove four locknuts (9), screws (12), plate (11), and grommet (10) from tank body (4). Discard locknuts (9).
4. Remove meter outlet tube (13) from tank body (4).
1. Install grommet (10) and plate (11) on tank body (4) with four screws (12) and new locknuts (9).
2. Install meter outlet tube (13) through hole in tank body (4).
3. Install new gasket (14) and coupling (3) on meter outlet tube (13) and fuel hose tube (1) with two
screws (2) and nuts (15).
4. Install meter outlet tube (13) and new gasket (7) on meter (5) with two screws (8) and new locknuts (6).
FOLLOW-ON TASK: Install fuel hose and nozzle (para. 12-24).
12-57
Back to Top
