TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 881 of 1207

12-61.

TM 9-2320-361-20

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

M185A3, M109A3

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Gasket

EQUIPMENT CONDITION

Adhesive (Appendix C, Item 3)

Parking

brake

set (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

1. Loosen screw (5) from dome light housing (12) and open dome light door (4).

NOTE

For 24V lamp replacement, push in lamp to unscrew.

2. Remove lamp (10) from dome light housing (12).

3. Remove screw (5), clip (6), washer (7), and lens (8) from dome light door (4).

4. Remove gasket (9) from dome light housing (12). Discard gasket (9).

NOTE

• Hold dome light assembly up to keep weight off wires.

• Tag wires for installation.

5. Remove four screws (11) and dome light housing (12) from ceiling (1).

6. Remove two screws (3) and wires (2) from dome light housing (12).

1.

2.

3.

4.

5.

6.

Install

lens (8) on dome light door (4) with clip (6), washer (7), and screw (5).

Apply adhesive to new gasket (9) and install on dome light housing (12).

Install lamp (10) on dome light housing (12).

Install

two wires (2) on dome light housing (12) with two screws (3).

Install dome light housing (12) on ceiling (1) with four screws (11).

Close dome light door (4) and tighten screw (5).

12-98