TM 9-2320-361-24-2
0375 00
0375 00-1/2 blank
FIELD MAINTENANCE INSTRUCTIONS
FOR SPECIAL PURPOSE KITS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
PRIMARY HEATER FUEL FILTER REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
M109A3, M185A3
Materials/Parts
Antiseize tape (item 42, WP 0468 00)
Equipment Condition
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Battery ground cable disconnected
(WP 0126 00).
REMOVAL
WARNING
Diesel fuel is flammable. Do not perform fuel system
procedures near open flames. Injury or death to personnel may
result.
1.
Remove fuel line (8) from elbow (7) and fuel tube (2) from elbow (3).
2.
Remove elbows (3) and (7) from filter (6).
3.
Remove two screws (5), washers (4), and filter (6) from van body (1).
INSTALLATION
NOTE
Wrap male pipe threads with antiseize tape prior to
installation.
1.
Install filter (6) on van body (1) with two washers (4) and screws (5).
2.
Install elbows (3) and (7) on filter (6).
3.
Install fuel tube (2) on elbow (3) and fuel line (8) on elbow (7).
4.
Connect battery ground cable (WP 0126 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
8
2
3
4
5
6
7
~
END OF WORK PACKAGE