TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

  TM-9-2320-361-24-2 - Page 654 of 1144

TM 9-2320-361-24-2
0377 00
0377 00-2
PRIMARY HEATER FUEL SHUTOFF AND COUPLING REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system
procedures near open flames. Injury or death to personnel may
result.
NOTE
Have drainage container ready to catch fuel.
REMOVAL
1.
Remove hose (8) from shutoff (1) and allow fuel to drain from hose (8).
2.
Remove shutoff (1) from nipple (2).
3.
Remove nipple (2) and plug (3) from tee (4).
4.
Remove tee (4) from coupling (5).
5.
Reach through fuel fill port (10) and remove nut (12), sleeve (13), and tube (11) from adapter (14).
6.
Remove adapter (14) from nut (15).
7.
Remove nut (15), two gaskets (7), washer (6), coupling (5), gasket (7), and washer (6) from fuel
tank (9). Discard gaskets (7).
INSTALLATION
NOTE
Wrap male pipe threads with antiseize tape prior to
installation.
1.
Reach through fuel tank fill port (10) and install nut (15), two new gaskets (7), washers (6), new
gasket (7), and coupling (5) on fuel tank (9).
2.
Install adapter (14) on nut (15).
3.
Install sleeve (13), nut (12), and tube (11) on adapter (14).
4.
Install tee (4) on coupling (5).
5.
Install nipple (2) and plug (3) on tee (4).
6.
Install shutoff (1) on nipple (2).
7.
Install hose (8) on shutoff (1).
8.
Fill fuel tank (TM 9-2320-361-10).
9.
Install fuel tank filler cap and sleeve (WP 0058 00).
10.
Connect battery ground cable (WP 0126 00).
11.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).


Back to Top