TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 974 of 1144
TM 9-2320-361-24-2
0455 00
0455 00-16
DIFFERENTIAL CARRIER REPAIR (Contd)
ASSEMBLY AND ADJUSTMENT (Contd)
16.
Using bearing sleeve remover/replacer and screw, align hole in sleeve (1) with setscrew (7) hole in
carrier (2) and install sleeve (1) in carrier (2).
17.
Install setscrew (7) in carrier (2) and sleeve (1).
NOTE
Install bearing with beveled side toward gear.
18.
Press bearing (4) on bevel gear (3).
19.
Install spacer (8) on bevel gear (3) until seated against bearing (4).
CAUTION
Use brass drift to install bevel gear. Failure to do so may result
in damage to gear.
20.
Install bevel gear (3) in carrier (2) so bevel gear (3) rests in sleeve (1).
21.
Install new woodruff key (6) on helical pinion shaft (5).
CAUTION
Use soft metal spacers to securely support bevel gear on sleeve
during installation. The bevel gear must not be able to move
within the housing. Failure to do so may result in damage to
bevel gear and/or housing.
NOTE
Ensure alignment of key in helical pinion shaft with keyway in
bevel gear.
22.
Press pinion shaft (5) through carrier (2) into bevel gear (3).
Back to Top
