TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 579 of 764

TM 9-2320-361-34

16-4. REAR WINCH REPAIR (M764)

(Contd)

e. Carriage Disassembly

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

16-36

Loosen screw (26) on support (25).

Loosen two nuts (24) and remove two setscrews (23), nuts (24), and support (25) from two rods (30).

Remove nut (21), lockwasher (27), and screw (26) from support (25). Discard lockwasher (22).

Remove two nuts (28), lockwashers (27), screws (20), and bracket (17) from two rods (30). Discard

lockwashers (27).

Remove setscrew (18), sprocket (19), woodruff key (14), sprocket (29), and washer (15) from

bracket (17). Discard woodruff key (14).

Loosen screw (6) on bracket (5).

Loosen two nuts (8) and remove two screws (9) and bracket (5) from two rods (30).

Remove two nuts (7) and bracket (5) from studs (4) and (12).

Remove nut (1) and washer (2) from stud (12).

Remove studs (4) and (12) from bracket (31) and remove four nuts (3) from studs (4) and (12).

Remove nut (11), lockwasher (10), and screw (6) from bracket (5). Discard lockwasher (10).

Remove two oil caps (16) from brackets (17) and (13).