TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 585 of 764

TM 9-2320-361-34

16-4.

REAR WINCH REPAIR (M764) (Contd)

h. Clutch Assembly

1.

Install clutch lining (30) on clutch plate (10) with ten new rivets (29).

2. Position sleeve (24) and ring (23) on clutch plate (10).

3. Install four new rivets (25) in ring (23) and clutch plate (10).

i. Drum Assembly

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

16-42

Install two new woodruff keys (11) and clutch plate (10) on drum shaft (7).

Aline sleeve (24) and clutch plate (10) and install two balls (28) in clutch plate (10) and sleeve (24)

with new lockwasher (34) and screw (33).

Aline sleeve (24), clutch plate (10), and drum shaft (7) and install spring (31), two detents (27), and

two balls (26) with plug (32).

Aline sleeve (24) with clutch plate (10) and install with new lockwasher (36) and screw (35).

Install spring (9) and collar (22) on drum shaft (7).

Aline collar (22) with drum shaft (7) and install new pin (1) in collar (22) and drum shaft (7).

Install drum (2) on drum shaft (7) with collar (6) and new pin (3).

Install bushing (5) on drum shaft (7) with new pin (4).

Install new pin (8) in drum shaft (7).

Install bushing (13) on drum shaft (7) with new pin (12).

Install washer (14), two new woodruff keys (16), and gear (15) on drum shaft (7) with two screws (20).

Lace two screws (20) with new safety wire (21).

Install washer (17) and bushing (18) on drum shaft (7) with new pin (19).