TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 591 of 764

TM 9-2320-361-34

16-4. REAR WINCH REPAIR (M764)

(Contd)

I

k. Rear

Winch

Assembly

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

Position shaft (30) partially through frame (10) and position lever (26) and lever (6) on shaft (30) and

slide shaft (30) completely in place.

Install two new woodruff keys (29) on shaft (30) and position levers (26) and (6) over two new

woodruff keys (29).

Install two screws (28) on levers (26) and (6) with two new locknuts (27).

Install jamnut (32) and clevis (5) on control lever (3) even with scribe mark.

Install control rod (3) on lever (6) with clevis pin (31) and new cotter pin (4).

Install eyebolt (1) on control rod (3) with clevis pin (33) and new cotter pin (2).

Install jamnut (24) on adjusting screw (25) and install adjusting screw (25) on frame (10).

Install idler bracket (23) on frame (10) with four washers (22) and screws (21).

Install two new packings (14) and grease fitting (18) on shaft (20) and retainer (15).

Install bearing (15), new clip ring (12), pulley (19), new clip ring (12), bearing (13), and retainer (15)

on shaft (20) with nut (17) and new cotter pin (16).

Install tension roller (8) on frame (10) with three screws (7), bevel washers (9), and new locknuts (11).

16-48