TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 583 of 764

TM 9-2320-361-34

16-4. REAR WINCH REPAIR (M764) (Contd)

g. Carriage Assembly

1. Install two rods (18) in cage (21).

2. Install two wear guides (17) on cage (21) with four new lockwashers (20) and screws (19).

3. Install washer (5) and sprocket (4) on bracket (8) with collar (11) and setscrew (10).

4. Install bracket (8) on two rods (18) with two screws (9), new lockwashers (6), and nuts (7).

5. Install four bearing sleeves (25) in two rollers (26).

6. Install two rollers (26) in cage (21) with two shafts (24) and new cotter pins (23).

7. Install roller (30) in cage (21) with pin (29), washer (31), and new cotter pin (32).

8. Install roller (27) in cage (21) with pin (28) and setscrew (33).

9. Install four spacers (16) and guard (15) on cage (21) with four washers (14), new lockwashers (13),

and screws (12).

10. Install plate (22) on two carriage horns (3) with two new lockwashers (2) and nuts (1).

16-40