TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 593 of 764

TM 9-2320-361-34

16-4.

REAR WINCH REPAIR (M764) (Contd)

17.

Install two grease fittings (3) in fork bracket (2).

18. Install new woodruff key (5) on fork shaft (4). Position fork (6) in fork bracket (2) and install fork

shaft (4) through fork bracket (2) and fork (6).

19. Install two pins (7) and new rivet (8) in fork (6).

20. Install control lever (9) on fork shaft (4) with new pin (1).

21. Install adapters (12) and (11) and breather (10) on worm gear housing cap (23).

22. Install two new gaskets (22) and worm gear housing cap (23) on worm gear housing (20) with five

new lockwashers (24) and screws (25).

NOTE

Ensure fork properly engages with clutch.

23. Install washer (19) and fork bracket (2) on worm gear housing cap (23) with new lockwasher (17)

and screw (16).

24. Install two screws (18) and new lockwashers (17) on fork bracket (2) and worm gear housing

cap (23).

25. Install washer (13) and eyebolt (21) on control lever (9) with nut (14) and new cotter pin (15).

16-50