TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 600 of 764
TM 9-2320-361-34
16-7. HYDRAULIC
LINE
REPLACEMENT (M342A2) (Contd)
NOTE
All hydraulic lines are removed the same. This procedure covers the
dump hoist cylinder lines.
a. Removal
1.
2.
3.
NOTE
Perform steps 1 through 3 for hydraulic cylinder lines.
Secure chain to dump body (1) and lifting device.
WARNING
●
All personnel
must
stand
clear
during lifting operations. A
swinging or shifting load may cause injury to personnel.
●
Never
work
under dump body until safety braces are properly
positioned. Injury to personnel may occur if dump body suddenly
lowers.
NOTE
Assistant will help with lifting operations.
Raise dump body (1) and position on two safety braces (2).
Remove chain from dump body (1) and lifting device.
16-57
Back to Top
