TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 685 of 764

TM 9-2320-361-34

d. Assembly

17-16. PERSONNEL HEATER BURNER MAINTENANCE

(Contd)

1. Insert new wick (5) in burner cup (4). Do not twist wick (5).

2. Lay strands of wick (5) in notches of fiber washer (6).

3. Install new fiber washer (6), vaporizor (7), washers (8) and (9), shield (10), and screw (11) on burner

cup (4).

4. Position burner cup (4) on header (1) and secure with three new lockwashers (2) and nuts (3).

1. Position new preformed packing (12), new O-ring (13), and burner (14) on heat exchanger (23) and

install with four clamp and hook bolts (16). Tighten nut-assembled lockwasher (17).

2. Install new lockwasher (21) and ground strap (20) on heater housing (15) and hook bolt (16) with

screw (22), new nut-assembled lockwasher (18) and nut-assembled lockwasher (19).

e. Installation

17-42