TM 9-2320-365-10
Change 2
3-77
(4)
Position hydraulic jack (1) under inside
bolt head on shock mount (6).
(5)
Unscrew jack ram (5) until it touches
shock mount (6).
(5.1) Remove four bolts (6.1), washers
(6.2), and rim cover (6.3) from
wheel (6.4).
(6)
Remove banjo bolt (7), two
washers (8), and CTIS hose (9)
from hollow wheel stud (10).
NOTE
Perform steps (4) and (5) when
removing rear tire.
NOTE
•
Both front and rear tires are
removed the same way. Rear
tire shown.
•
Air will not escape when CTIS
hose is removed from hollow
wheel stud.
NOTE
Perform the following step on
vehicles equipped with rim
covers.