TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 1387 of 1760

VOLTAGE TEST

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

WARNING

TM 9-2320-365-20-1

Change 2

2-971

(1) Disconnect connector P217 from PTO.

(2) Set multimeter to volts DC.

(3) Connect positive (+) probe of multimeter to

connector P217-B.

(4) Connect negative (-) probe of multimeter to

ground.

(5) Start engine (TM 9-2320-365-10).

(6) Position PTO switch to on

(TM 9-2320-365-10) and note reading on

multimeter.

(7) If 24 VDC is not present, go to step 3 of this

fault.

(8) Position PTO switch to off

(TM 9-2320-365-10).

(9) Shut down engine (TM 9-2320-365-10).