TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-365-20-1 - Page 1391 of 1760

TM 9-2320-365-20-1
VOLTAGE TEST
Remove rings, bracelets, watches, necklaces,
and any other jewelry before working around
vehicle.
Jewelry can catch on equipment and
cause injury or short across electrical circuits
and cause severe burns or electrical shock.
WARNING
Change 2
2-975
(1) Remove six screws from auxiliary panel.
(2) Lift auxiliary panel from auxiliary panel
housing to gain access.
(3) Disconnect connector P904 from PTO
switch.
(4) Set multimeter to volts DC.
(5) Connect positive (+) probe of multimeter to
connector P904-5.
(6) Connect negative (-) probe of multimeter to
ground.
(7) Position master power switch to on
(TM 9-2320-365-10) and note reading on
multimeter.
(8) If 24 VDC is not present, repair wire 1925
(para 2-40) or replace auxiliary panel cable
assembly (all models except M1079 w/o
winch) (para 7-49).
(9) Position master power switch to off
(TM 9-2320-365-10).


Back to Top