TM 9-2320-365-20-1
CONTINUITY TEST
Change 2
2-977
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
PTO switch terminal 5.
(3) Connect negative (-) probe of multimeter to
PTO switch terminal 1.
(4) Position PTO switch to on
(TM 9-2320-365-10) and note reading on
multimeter.
(5) If continuity is not present, replace PTO
switch (para 7-18).
(6) Position PTO switch to off
(TM 9-2320-365-10).