TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 575 of 1760

CONTINUITY TEST

(1)

Remove instrument panel for access (para

7-15).

(2)

Disconnect connector PX14A from hazard

lights switch lamp base connector.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter to

one terminal of lamp base connector.

(5)

Connect negative (-) probe of multimeter to

second terminal of lamp base connector and

note reading on multimeter.

(6)

If continuity is not present, replace rocker

switch lamp (para 7-18).

Inspect connector pins/sockets for damage,

corrosion, and serviceability.

Check that

connector pins are not pushed back and

are capable of making good contact.

NOTE

Change 1

2-376.5

TM 9-2320-365-20-1