TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
2-2081
2-2081
2-2081
2-2081
2-2081
CONTINUITY TEST
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter
to terminal lug TL164.
(3)
Connect negative (-) probe of multimeter
to connector J921-A and note reading on
multimeter.
(4)
If continuity is not present, repair wire 32
(para 2-43) or replace troop transport
alarm switch connector (para 20-80).
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter
to terminal lug TL165.
(3)
Connect negative (-) probe of multimeter
to connector J921-C and note reading on
multimeter.
(4)
If continuity is not present, repair wire
3028 (para 2-43) or replace troop transport
alarm switch connector (para 20-80).