TM-9-2320-365-20-2
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-2 - Page 173 of 1432
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
2-1227
2-1227
2-1227
2-1227
2-1227
CONTINUITY TEST
(1)
Remove 12 screws, lockwashers, and washers
from raceway cover. Discard lockwashers.
(2)
Remove raceway cover from raceway.
NOTE
(3)
Disconnect J connector from P connector.
(4)
Set multimeter to ohms.
(5)
Connect positive (+) probe of multimeter to
socket 1 of J connector.
(6)
Connect negative (-) probe of multimeter to
pin 2 of J connector and note reading on
multimeter.
(7)
If continuity is not present, replace blackout
light (para 16-58).
Both blackout lights are tested
the same way. Refer to Table
2-14. M1079 Blackout Light
Locations and Connector
Numbers for details. Blackout
Light DS75 shown.
Back to Top
