Change 1
2-1217
TM 9-2320-365-20-2
CONTINUITY TEST
(1)
Disconnect AC power (TM 9-2320-365-10).
(2)
Remove six screws and cover from 110/208
VAC POWER DISTRIBUTION PANEL.
(3)
Remove circuit breaker CB9 from 110/208
VAC POWER DISTRIBUTION PANEL.
(4)
Position circuit breaker CB9 to ON
(TM 9-2320-365-10).
(5)
Set multimeter to ohms.
(6)
Connect positive (+) probe of multimeter
to output terminal of circuit breaker CB9.
(7)
Connect negative (-) probe of multimeter
to input terminal of circuit breaker CB9 and
note reading on multimeter.
(8)
If continuity is not present, replace circuit
breaker CB9 (para 16-64).
(9)
Install circuit breaker CB9 on 110/208 VAC
POWER DISTRIBUTION PANEL.