Change 1
2-1207
TM 9-2320-365-20-2
CONTINUITY TEST
(1)
Remove screw and cover from 110 VAC
outlet J231.
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to
K35 relay base terminal 5.
(4)
Connect negative (-) probe of multimeter to
supply pole on 110 VAC receptacle J231
and note reading on multimeter.
(5)
If continuity is not present, repair or replace
wire 702B (para 2-40).
(6)
If continuity is present, replace relay K35
(para 16-62).
(7)
Install cover on 110 VAC outlet J231 with
screw.
(8)
Close cover on relay box assembly.
(9)
Tighten screw in cover.