TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
2-1319
2-1319
2-1319
2-1319
2-1319
CONTINUITY TEST
(1)
Remove six screws and cover from 110/208
VAC POWER DISTRIBUTION PANEL.
(2)
Loosen screw in terminal board TB3.
(3)
Remove wire 3085L from terminal board TB3.
(4)
Set multimeter to ohms.
(5)
Connect positive (+) probe of multimeter to
J237 24 vdc ground (G) binding post.
(6)
Connect negative (-) probe of multimeter to
terminal board TB3 wire 3085L and note
reading on multimeter.
(7)
If continuity is not present, repair or replace
wire 3085L (para 2-40).
(8)
Position wire 3085L in terminal board TB3.
(9)
Tighten screw in terminal board TB3.
(10)
Install cover on 110/208 VAC POWER
DISTRIBUTION PANEL with six screws.