TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 204 of 1268

TM 9-2320-365-20-3

6-46

Change 2

6-8.

PERSONNEL HEATER HOSES REPLACEMENT (CONT)

(11) Lower cab (TM 9-2320-365-10).

(12) Position heater outlet hose (6) on return fitting (10).

(13) Position heater inlet hose (7) on supply fitting (11).

(14) Engage as many clamp tabs (4) as possible in tab

windows (5) allowing little or no play between

clamps (2) and heater outlet hose (6) and heater

inlet hose (7).

(15) Tighten two clamps (2) to 8-9-in. (1 N•m).

(16) Raise cab (TM 9-2320-365-10).

(17) Measure gap on two clamps (2).

NOTE

Heater outlet hose is marked with an arrow

pointing down.

NOTE

Heater inlet hose is marked with an arrow

pointing up.

NOTE

Minimum allowable gap on clamp is

0.1 in. (0.3 cm).

If gap is less than 0.1

in. (0.3 cm), remove and re-install

clamp.