TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 743 of 1268

TM 9-2320-365-20-3

Change 2

10-17

(8)

Apply a small bead of gasket maker to mating

surface of bevel gear hub cover (15).

(9)

Install bevel gear hub cover (15) on wheel end hub

assembly (9).

(10) Position 12 screws (16) in bevel gear hub cover

(15).

(11) Tighten 12 screws (16) to 35-50 lb-ft (47-68 N

•

m).

c. Follow-On Maintenance.

(1)

Fill hub assembly (front axle) (Appendix H).

(1.1) Refill axle differential (rear axle) (Appendix H).

(2)

Start engine (TM 9-2320-365-10).

(3)

Test operate vehicle and check for unusual noise

or vibration from planetary drive assembly.

(4)

Shut down engine (TM 9-2320-365-10).

(5)

Check for oil leaks around bevel gear hub cover.

End of Task.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash immediately

with soap and water.

Failure to comply

may result in injury to personnel.