TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 745 of 1268

TM 9-2320-365-20-3

Change 2

10-19

b. Installation.

NOTE

(1)

Remove screw from axle shaft (1).

(2)

Align splines of axle shaft (1) with gears in differential

carrier.

(3)

Install axle shaft (1) in wheel hub assembly (2).

(4)

Apply adhesive to grease cap (3).

(5)

Install grease cap (3) on wheel hub assembly (2).

c.

Follow-On Maintenance.

(1)

Add oil to differential carrier (Appendix H).

(2)

Add oil to wheel hub assembly (Appendix H).

(3)

Start engine (TM 9-2320-365-10).

(4)

Road test vehicle and check for unusual noise or

vibration from axles.

(5)

Shut down engine (TM 9-2320-365-10).

(6)

Check around grease cap for oil leaks.

End of Task.

WARNING

Perform step (1) only if axle shaft is not

being replaced.

Adhesives,

solvents,

and

sealing

compounds can burn easily can give off

harmful vapors, and are harmful to skin and

clothing.

Keep away from open fire and use

in a well-ventilated area.

If adhesive,

solvent, or sealing compound gets on skin

or clothing, wash immediately with soap and

water.

Failure to comply may result in injury

to personnel.