TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 746 of 1268

TM 9-2320-365-20-3

10-20

Change 2

10-5.

SPINDLE REPLACEMENT

This task covers:

a.

Removal

b.

Cleaning/Inspection

c.

Installation.

d.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10)

Cab raised (TM 9-2320-365-10)

Air tanks drained (TM 9-2320-365-10)

Wheel and tire removed (TM 9-2320-365-10)

Hub assembly drained (for front spindles only)

(Appendix H)

Differential spider assembly removed (para 10-

3)

Wheel bearing/CTIS seal removed (para 10-2)

Front brake shoes removed (front spindles

only) (para 11-2)

Rear brake shoes removed (rear spindles only)

(para 11-3)

Front brake air chamber removed (front

spindles only) (para 11-7)

Rear brake air chambers removed (rear

spindles only) (para 11-8)

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Jack, Hydraulic, Hand (Item 21, Appendix C)

Tool Kit, Genl Mech (Item 44, Appendix C)

Trestle, Motor Vehicle Maintenance (Item 45, Appendix

C)

Wrench Set, Socket (Item 47, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)

Materials/Parts

Antiseize Compound (Item 14, Appendix D)

Grease, Automotive and Artillery (GAA) (Item 23,

Appendix D)

Oil, Lubricating, Gear, 80W-90 (Item 42, Appendix D)

Rag, Wiping (Item 51, Appendix D)

Sealing Compound (Item 62, Appendix D)

Solvent, Dry Cleaning (Item 71, Appendix D)

Retainer (Item 214, Appendix G)

Personnel Required

(2)

WARNING

Wear appropriate eye protection when working under vehicle due to the possibility of

falling debris.

Failure to comply may result in injury to personnel.

NOTE

Front, intermediate, and rear spindles are removed the same way. Front left spindle shown.