TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 951 of 1268

TM 9-2320-365-20-3

d. Installation.

NOTE

Left and right tie rod ends are installed the

same way. Left side shown.

(1) Install tie rod (1) in two steering knuckle arms (2).

(2) Install slotted nut (3) on each end of tie rod (1).

(3) Tighten two slotted nuts (3) to 140-180 lb-ft (190-244

N·m).

NOTE

If slots in slotted nuts do not line up with

cotter pin holes in tie rod ends, tighten slotted

nut until slots and cotter pin holes are

aligned.

(4) Install cotter pin (4) in each end of tie rod (1).

e. Follow-On Maintenance.

(1) Lower cab (TM 9-2320-365-10).

(2) Lubricate tie rod end (Appendix H).

(3) Perform front wheel toe-in alignment (para 13-5).

End of Task.

Change 1

13-8.1/(13-8.2 Blank)