TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 959 of 1268

TM 9-2320-365-20-3

Change 2

13-15

13-7.

POWER STEERING HOSES AND TUBE REPLACEMENT

This task covers:

a. Return Hose Removal

b. Return Hose Installation

c. Pressure Hose Removal

d. Pressure Hose Installation

e. Suction Hose and Tube Removal

f.

Suction Hose and Tube Installation

g. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Cab raised (TM 9-2320-365-10).

Power steering pump reservoir drained

(Appendix H)

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Pan, Drain (Item 24, Appendix C)

Dispensing Pump, Hand Driven (Item 5,

Appendix C)

Tools and Special Tools (Cont)

Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B)

Materials/Parts

Cap and Plug Set (Item 15, Appendix D)

Ties, Cable, Plastic (Item 76, Appendix D)

Oil, Lubricating, OE/HDO 10 (Item 43, Appendix D)

Nut, Self-Locking (2) (Item 134, Appendix G)

Clamp (Item 7, Appendix G)

Clamp (Item 8, Appendix G)

a. Return Hose Removal.

(1)

Loosen hose clamp (1) on return hose (2).

(2)

Disconnect return hose (2) from steering gear box

(3).

WARNING

CAUTION

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

Cap or plug hydraulic connections to prevent

contamination of power steering system.

Failure to comply may result in damage to

equipment.