TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 955 of 1268

TM 9-2320-365-20-3

Change 2

13-11

13-6.

STEERING COLUMN REPLACEMENT

This task covers:

a.

Removal

b.

Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Turn signal switch removed (para 7-25).

Cab raised (TM 9-2320-365-10).

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)

Tools and Special Tools (Cont)

Wrench, Torque, 0-200 lb-in. (Item 58, Appendix

C)

Wrench Set, Socket (Item 49, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Materials/Parts

Sealing Compound

(Item 68.3, Appendix D)

Washer, Spring (2) (Item 279, Appendix G)

Locknut (Item 60, Appendix G)

Nut, Self-Locking (4) (Item 116, Appendix G)

a. Removal.

(1)

Remove four self-locking nuts (1), eight washers

(2), and four screws (3) from steering column

assembly (4). Discard self-locking nuts.

(2)

Remove locknut (5) and bolt (6) from steering gear

arm universal joint (7).

Discard locknut.

(3)

Disconnect steering gear arm universal joint (7)

from steering gear input shaft (8).

(4)

Lower cab (TM 9-2320-365-10).