TM 9-2320-365-20-3
Change 2
13-21
(2)
Install pressure hose (1) on steering gear box (3).
NOTE
(3) Install two clamps (4), screws (5), and self-locking
nuts (6) on pressure hose (1).
e. Suction Hose and Tube Removal.
(1) Loosen hose clamp (1) on suction hose (2).
(2) Disconnect suction hose (2) from suction tube (3).
CAUTION
Install plastic cable ties as required.
Cap or plug hydraulic connections to prevent
contamination of power steering system.
Failure to comply may result in damage to
equipment.