TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 968 of 1268

TM 9-2320-365-20-3

13-7. POWER STEERING HOSES AND TUBE REPLACEMENT (CONT)

CAUTION

Clamp tongue must be started in clamp

groove.

Failure to comply may result in

damage to equipment.

(4) Position clamp (4) on suction hose (8).

(5) Install suction hose (8) on power steering reservoir (9).

(6) Engage as many clamp tabs (6) as possible in tab

windows (7) allowing little or no play between clamp (4)

and suction hose (8).

(7) Tighten clamp (4) to 12-18 lb-in. (1-2 N·m).

NOTE

Minimum allowable gap on clamp is 0.2 in.

(0.5 cm). If gap is less than 0.2 in. (0.5 cm),

remove and re-install clamp.

(8) Measure gap on clamp (4).

13-24