TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 976 of 1268

TM 9-2320-365-20-3

13-30

Change 2

13-8.

POWER STEERING PUMP RESERVOIR AND BRACKET REPLACEMENT (CONT)

(10) Position clamp (15) on suction hose (19).

(11) Connect suction hose (19) on power steering pump

reservoir (11).

(12) Engage as many clamp tabs (19) as possible in tab

windows (18) allowing little or no play between

clamp (15) and suction hose (13).

(13) Tighten clamp (15) to 12-18 lb-in. (1-2 N

•m).

(14)

Measure gap on clamp (15).

(15) Loosen screw (20) in clamp (21) as far as possible

without disengaging screw from D-nut (22).

(16) Unhook clamp tabs (23) from tab windows (24).

CAUTION

Clamp tongue must be started in clamp

groove. Failure to comply may result in

damage to equipment.

NOTE

Minimum allowable gap on clamp is 0.2 in.

(5 mm).

If gap is less than 0.2 in. (5 mm),

remove and re-install clamp.