TM-9-2320-365-20-4
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-4 - Page 69 of 968
TM 9-2320-365-20-4
Change 2
16-35
NOTE
(3)
Position door (7) on cab with hinge (1) in slot in
forward edge of door and bolt holes aligned with
openings in door.
(4)
Position door (7) on hinge (1) with three
washers (8) and screws (9).
(5) Position door (7) on hinge (4) with three
washers (10) and screws (11).
(6) Position door (7) so that gap between door
and cab is approximately equal all around.
(7)
Tighten three screws (9 and 11) one-half turn.
(8) Open, close, and open door (7) to ensure
correct operation.
(9) Tighten three screws (9 and 11) to 22-26 lb-ft
(30-35 N•m).
(10) Apply grease to hinges (1 and 4).
(11) Install four clip nuts (12) on door (7).
(12) Install wiring harness (13) through access hole in
forward edge of door (7).
(13) Install door arrestor assembly (14) on cab with
washer (15), two spring washers (16), and screw
(17).
(14) Install door arrestor assembly (14) on bottom of
door (7) with two screws (18).
Step (5) through (7) requires the aid of
an assistant.
Back to Top
