TM 9-2320-365-20-4
16-36
Change 1
16-5.
DOOR REPAIR/ADJUSTMENT (ALL MODELS EXCEPT M1081) (CONT)
(15) Position mirror assembly (19) on door (7) with four
screws (20).
(16) Tighten four screws (20) to 84-96 lb-in. (9-11 N•m).
g. Door Adjustment.
(1) Support door (1) and loosen six screws (2) on
bottom hinge (3) and top hinge (4).
(2)
Adjust door (1) so that gap between door (1) and
cab is approximately equal all around.
(3)
Open, close, and open door (1) to ensure correct
operation.
(4)
Tighten six screws (2) on top hinge (4) and bottom
hinge (3) to 22-26 lb-ft (30-35 N•m).
NOTE
•
Steps (1) through (4) require the aid of an
assistant.
•
Loosen door hinge screws only enough to
allow small adjusting movements of door
NOTE
•
Steps (1) through (4) require the aid of
an assistant.
•
Loosen door hinge screws only enough
to allow small adjusting movements of
door