TM 9-2320-365-20-4
Change 2
16-39
16-6.
M1081 DOOR REPAIR/ADJUSTMENT
This task covers:
a. Window and Window Regulator Removal
b. Window and Window Regulator Installation
c. Door Latch/Lock Disassembly
d. Door Latch/Lock Assembly
e. Door Upper-Half Removal
f.
Door Upper-Half Installation
g. Door Lower-Half Removal
h. Door Lower-Half Installation
i.
Door Adjustment
j.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Marker light removed (para 7-31).
Upper door-half removed (for lower door-half removal
only).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Screwdriver Attachment, Socket Wrench (Item 49,
Appendix B)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Tools and Special Tools (Cont)
Drill, Twist (Item 8, Appendix C)
Goggles, Industrial (Item 15, Appendix B)
Materials/Parts
Sealing Compound (Item 61, Appendix D)
Grease, Automotive and Artillery (GAA) (Item
23, Appendix D)
Seal, Nonmetallic (Item 253, Appendix G)
Soap, Laundry (Item 69, Appendix D)
Rivet, Compression (12) (Item 237, Appendix
G)
Rivet (6) (P/N 20601-M4W2)
Personnel Required
(2)
NOTE
a.
Window and Window Regulator Removal.
NOTE
(1)
Remove cover (1) from door handle (2).
(2)
Remove screw (3), door handle (2), and washer (4)
from door (5).
(3)
Remove four screws (6) and handle (7) from door
(5).
If complete repair of the door is required, it
will be necessary to notify DS maintenance
to replace the door side window at the
completion of Unit level repairs.
Left and right windows and window
regulators are removed the same way.
Right
side shown.