TM-9-2320-365-20-5

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-5 - Page 115 of 666

TM 9-2320-365-20-5

Change 2

20-256.5

c. Cleaning/Inspection.

d. Assembly.

(1)

Apply sealing compound around the edge of all

exterior exposed surfaces.

(2)

Install two lockwashers (1), coupling (2), seals (3),

and nuts (4) on pump box (5).

WARNING

WARNING

•

Dry cleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and

gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do

not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the

flashpoint for Type I dry cleaning solvent is 100 degree F (38 degree C) and for Type II is 130

degree F (50 degree C). Failure to comply may result in serious injury or death to

personnel.’

•

If personnel become dizzy while suing dry cleaning solvent, immediately get fresh air and

medical help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts

eyes, immediately flush eyes with water and get immediate medical attention. Failure to

comply may result in injury to personnel.

NOTE

Clean all metal parts with dry cleaning solvent and dry using compressed air prior to inspection and

assembly.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give

off harmful vapors, and are harmful to

skin and clothing.

To avoid injury or

death, keep away from open fire and

use in a well-ventilated area.

If

adhesive,

solvent,

or

sealing

compound gets on skin or clothing,

wash immediately with soap and

water.

Failure to comply may result in

injury to personnel.