TM 9-2320-365-20-5
20-220
Change 2
20-41.
M1079 HEATER KIT INSTALLATION/REMOVAL (CONT)
(82) Disconnect connector J314 (151) from heater fuel
pump power cable connector (152).
(83) Install dust cap (153) on heater fuel pump power
cable connector (152).
(84) Install dust cap (154) on fuel inlet port (146).
(85) Install dust cap (155) on fuel overflow port (150).
(86) Install dust cap (156) on heater power cable
connector (40).
(87) Remove four screws (157), lockwashers (158), and
washers (159) from heater duct (160).
Discard
lockwashers.