TM 9-2320-365-20-5
20-220.2
Change 2
20-41.
M1079 HEATER KIT INSTALLATION/REMOVAL (CONT)
(92)
Remove two self-locking nuts (176), screws (177),
lockwashers (178), washers (179), and bracket
(175) from pod panel (142).
(93) Remove heater duct (160) from pod panel (142).
(94) Remove heater (62) from pod panel (142).
(95) Install two twist locks (59) on heater (62).
(96) Position heater control unit (23) on heater (62).
(97) Latch two screws (58) on heater control unit (23).
(98) Connect connector P4 (57) to connector J4 (38).
WARNING
CAUTION
Heater weighs approximately 120 lbs (54
kgs). Use the aid of an assistant when
lifting. Failure to comply may result in
injury to personnel.
Use caution when installing heater. Heater
fuel pump power cable installed. Failure to
comply may cause damage to equipment.